photo de profil d'un membre

Alessandro

Résumé

Electrical engineer with expertise in semiconductor device physics, power electronics, radiation effects on electronic and optical components, control theory and microgrids.

Expériences professionnelles

Doctoral assistant at powerlab

Ecole polytechnique fédérale de Lausanne

Depuis le 02 octobre 2019

Simulation, design, crystal growth, fabrication and testing of semiconductor devices for
optoelectronics and power conversion, including the following achievements:
▫ First demonstration of the direct high-temperature growth of gallium nitride (GaN) on Si(111)
substrates by metalorganic vapor phase epitaxy (MOVPE), enabling the realization of verticallyconducting
GaN/Si hetero-structures for power electronics and LEDs
▫ First demonstration of the direct high-temperature growth of GaN on ScAlMgO4 by MOVPE
▫ Improvement of the light emission from multiple quantum wells grown on InGaN on ScAlMgO4
▫ First demonstration of high-voltage fully-vertical p-InGaN/GaN Schottky diodes with ultra-low onstate
resistance, exploiting the piezoelectric field in the InGaN layer
▫ Realization of high-voltage quasi-vertical GaN Schottky diodes with nickel oxide terminations

Fellow electrical engineer

CERN

De Janvier 2016 à Décembre 2018

During my fellowship at CERN, I have worked on the development of a radiation resistant, LED-based, lighting system for particle accelerator tunnels, including the following activities:
• Design, simulation, prototyping and testing of radiation resistant power supplies for LEDs
• Organization of irradiation campaigns at CERN irradiation test facilities (IRRAD) and external laboratories (Ionisos, France) for optical materials, electronic and optoelectronic components
• Development of ad hoc measuring instruments for irradiated samples
• Detailed study and analysis of radiation effects on:
- Electronic components for power supply units, including GaN transistors, Si bridge diodes, SiC Junction Barrier Schottky diodes
- High-Brightness High-Power white GaN LEDs
- Glass and plastic materials for secondary optics
• Support in writing tender documentation for the procurement of radiation hard luminaires implementing the developed radiation tolerant power supply for LEDs.
My research efforts led to working prototypes of LED luminaires able to withstand the radiation levels expected in >5 years of operation in CERN tunnels (annual dose >1 kGy, annual 1 MeV neutron equivalent fluence >5x1e12 n/cm2).

In parallel, I worked as Deputy Project Manager for the refurbishment of the low voltage electrical infrastructure of the Proton Synchrotron Booster (PSB) accelerator and of the Proton Synchrotron (PS), and Project manager for the electrical systems of the future extension of SX5 building, with tasks including:
- Production of a detailed inventory of existing distribution infrastructure
- Development of proposals for upgraded and new distribution systems, including: detailed engineering of new solutions for the low voltage infrastructure, preparation of documents for quotation, and the supervision of low voltage installation works
- Planning and follow-up of activities on site
- Commission equipment on site, prepare and archive test reports

Electrical engineer - simulation and modelling

CESI

De Octobre 2015 à Décembre 2015

Transmission network reliability and adequacy risk assessment

Internship

ABB

De Juin 2013 à Octobre 2013

Design, prototyping and testing of a wireless temperature sensor for rotors of electrical machines

Parcours officiels

PhD – Génie électrique (EDEE) – Génie électrique et électronique (EL) – STI – 2024

Langues

Anglais - Courant

Français - Technique

Italien - Langue maternelle

Compétences

semiconductor physics
Competenze analitiche
chemical vapor deposition
Dry etching
Safety
Work in radiation areas
Protezione contro le radiazioni
Highly hazardous chemicals
ISO 5 cleanroom
Cleanroom
Switching losses
C-V measurements
I-V measurements
Electroluminescence
Radioactive devices
Hall measurements
High voltage test
Semiconductor device characterization
tcad
Semiconductor device simulation
Semiconduttori
Wet etching
RIE
Reactive ion etching
ICP-RIE
Inductively coupled plasma reactive ion etching
Film sottili
Thin film etching
Deposizione chimica da vapore
Sputtering
Evaporation
Plasma enhanced chemical vapor deposition
MOCVD
CVD
PVD
TEM
AFM
SEM
Atomic layer deposition
Thin film deposition
Photoresist development
Photolithography
Litografia (elettronica)
Mask design
Litography
Photoluminescence spectroscopy
Raman Spectroscopy
Differential interference contrast optical microscopy
Microscopio elettronico a scansione
Microscopio a forza atomica
X-ray diffraction
Attrezzature di prova
Sistemi elettrici
Progettazione sistemi di controllo
Elettronica di potenza
Crystal characterization
Crystal growth
Source meter unit
Power analyzer
Oscilloscopio
XBee
ATMEL
ABB DOCWin
TR-Ciel
Altium
EAGLE CAD
PCB design
Progettazione circuiti stampati
Origin Lab
LibreOffice
CentOS
Red Hat Linux
Fedora
Microsoft Windows
KLayout
L-Edit
LabVIEW
MATLAB
C
Simulink
Electrical Engineering
Problem Solving
Numerical Analysis
Control Theory
Microgrids
Compound semiconductors
PSpice
COMSOL
LaTeX
Microsoft Office
FEMM
Lavoro di squadra
Autodesk Inventor
Love to learn
LTSpice
Microsoft Word
Elettronica
Scilab
PSCAD
Radiation effects on semiconductors